Configuration Guide Generator

Support
Downloads
- Upgrading Reader Firmware
About Code
- Careers
  - Careers
  - Notify Me of Job Openings!
HOME

CR900FD
CR950

CR1000
CR1000 XHD

CR1400
CR1400 XHD
CR1428

CR2600
CR2600 XHD

CR3600
CR3600 DPM

CR8000
CR8200

Back to the Configuration Guide Generator >>

Select All

Print All

Save All

View Selected

Go Back

Save

Searching:

Settings Categories

View All Configuration Categories
General Reading Mode Settings
Data Formatting (Prefix/Suffix) Settings
Symbology Settings
Keyboard Language Settings
Operating System Settings
1. Alternate Operating System (Linux/Mac) On
2. Alternate Operating System (Linux/Mac) Off - Default
USB Settings
RS232 Settings
Scan Delay Settings
Miscellaneous Settings
1. Enable Upload Image Mode
2. Disable Upload Image Mode - Default
Reader/Modem Command Settings
1. Reader Information, limited, 1500
Reset, Clear and Save Reader Settings
Custom Terminal Settings
Data Validation

Use this link to view the barcode in a scanner friendly window.

Continuous Scan Mode On:
Scan this barcode to direct the reader to constantly attempt to decode.

Motion Detect Off (Out of Stand) - Default:
Scan this barcode to disable motion detect scan mode (for readers with a stand, this will only disable motion detect when the reader is not in the stand)

Motion Detect Always On:
Scan this barcode to enable motion detect scan mode (for readers with a stand, the unit will be in motion detect mode in and out of stand)

No Motion Detection Delay:
If one of the motion detection scanning modes is enabled, this option will trigger motion detect immediately upon seeing motion (i.e. no delay).

500ms Motion Detection Delay - Default:
If one of the motion detection scanning modes is enabled, this option will cause the reader to wait 500 milliseconds before attempting to decode, limiting LED misfires.

Enable Cell Phone Reading Enhancement:
Scan this barcode to enable optimization for reading barcodes from a mobile phone/smartphone screen.

Disable Cell Phone Reading Enhancement - Default:
Scan this barcode to disable optimization for reading barcodes from a mobile phone/smartphone screen.

Set Motion Detect Maximum Brightness to 25%:
Scan this barcode to enable motion detect mode to use 25% of the AGC curve.

Set Motion Detect Maximum Brightness to 50%:
Scan this barcode to enable motion detect mode to use 50% of the AGC curve.

Set Motion Detect Maximum Brightness to 75%:
Scan this barcode to enable motion detect mode to use 75% of the AGC curve.

Set Motion Detect Maximum Brightness to 100% - Default:
Scan this barcode to enable motion detect mode to use 100% of the AGC curve.

Enable Target LED During Image Capture - Default:
Scan this barcode to keep the target on while capturing images.

Disable Target LED During Image Capture:
Scan this barcode to turn off the target while capturing images.

Motion Detection On In Stand - Default:
Scan this barcode to configure the reader to scan when it detects motion when the reader is in its stand.

Enable Stand Detection - Default:
Scan this barcode to enable the reader to detect when it is placed in a stand.

Reader Text Commands Off - Default:
When on, reader will accept configuration changes via text commands sent over the communication channel; requires communication that supports transmission to the reader (USB Downloader Mode, RS232). Turn off to disable this feature.

Reader Text Commands On:
When on, reader will accept configuration changes via text commands sent over the communication channel; requires communication that supports transmission to the reader (USB Downloader Mode, RS232). Turn off to disable this feature.

Beep On Vibrate On - Default:
Scan this barcode to turn on both the beeper and vibrating feedback indicators.

Beep Off Vibrate On:
Scan this barcode to turn off the beeper, but turn on the vibrating feedback indicator.

Beep On Vibrate Off:
Scan this barcode to turn on the beeper, but turn off the vibrating feedback indicator.

Beep Off Vibrate Off:
Scan this barcode to turn off both the beeper and vibrating feedback indicators.

Targeting On - Default:
When on, reader will turn on a blue LED bar that helps users aim at the barcode they are attempting to read.

Enable Targeting-Always-On:
Scan this barcode turn on a blue LED targeting bar and leave it on to help users aim at the barcode.

Beep Volume 0%:
Scan this barcode to turn off the beeper.

Beep Volume 33%:
Scan this barcode to reduce beeper volume to 33% of maximum.

Beep Volume 67%:
Scan this barcode to reduce beeper volume to 67% of maximum.

Beep Volume 100% - Default:
Scan this barcode to turn on the beeper at its highest volume.

Disable Data Formatting - Default:
Scan this barcode to transmit barcode data in its encoded case.

Prefix Comma:
Scan this barcode to set a comma (ASCII 0x2C) as a prefix to the barcode.

Prefix Space:
Scan this barcode to set a space (ASCII 0x20) as a prefix to the barcode.

Prefix Tab (USB Keyboard Mode Only):
Scan this barcode to set a keyboard tab as a prefix to the barcode.

Prefix Tab (RS232 Mode Only):
Scan this barcode to set a tab (ASCII 0x09) as a prefix to the barcode.

Erase Prefix Data:
Scan this barcode to remove any prefixes that are prepended to the barcode data.

Suffix Comma:
Scan this barcode to set a comma (ASCII 0x2C) as a suffix to the barcode.

Suffix Space:
Scan this barcode to set a space (ASCII 0x20) as a suffix to the barcode.

Suffix Enter (USB Keyboard Mode Only):
Scan this barcode to set a keyboard enter as a suffix to the barcode.

Suffix Tab (USB Keyboard Mode Only):
Scan this barcode to set a keyboard tab as a suffix to the barcode.

Suffix Tab (RS232 Mode Only):
Scan this barcode to set a tab (ASCII 0x09) as a suffix to the barcode.

Suffix Carriage Return (RS232 Mode Only):
Scan this barcode to set a carriage return (ASCII 0x0D) as a suffix to the barcode.

Suffix Carriage Return Line Feed (RS232 Mode Only) - Default:
Scan this barcode to set a carriage return (ASCII 0x0D) and line feed (ASCII 0x0A) as a suffix to the barcode.

Suffix Line Feed (RS232 Mode Only):
Scan this barcode to set a line feed (ASCII 0x0A) as a suffix to the barcode.

Erase Suffix Data:
Scan this barcode to remove any suffixes that are appended to the barcode data.

Convert Barcode Data to Uppercase:
Scan this barcode to convert all reader alphabetic output to uppercase letters.

Convert Barcode Data to Lowercase:
Scan this barcode to convert all reader alphabetic output to lowercase letters.

Convert Barcode Data to Bracketed Hex Output:
Scan this barcode to convert all reader output to corresponding hexadecimal values of the characters encoded.

Erase Prefix & Suffix Data:
Scan this barcode to remove all prefixes and suffixes

Prefix AIM ID Off - Default:
When on, reader will output a symbology identifier (as defined by the AIM Organization) as a prefix to the barcode.

Prefix AIM ID On:
When on, reader will output a symbology identifier (as defined by the AIM Organization) as a prefix to the barcode.

Australian Post On:
Scan this barcode to enable decoding of Australian Post barcodes.

Australian Post Off - Default:
Scan this barcode to disable decoding of Australian Post barcodes.

Aztec On - Default:
Scan this barcode to enable decoding of Aztec barcodes.

Aztec Off:
Scan this barcode to disable decoding of Aztec barcodes.

Aztec Inverse & Normal On:
Scan this barcode to enable decoding of inverse (i.e. light barcode on a dark background) and normal Aztec barcodes.

Aztec Inverse Off - Default:
Scan this barcodeto disable decoding of inverse Aztec barcodes (has no effect on normal).

Enable BC412 - Disable BC412 Reverse:
Scan this barcode to enable reading BC412 Regular but not Reverse

Disable BC412 Regular and Reverse - Default:
Scan this barcode to disable reading BC412 Regular and Reverse

Canada Post On:
Scan this barcode to enable decoding of Canada Post barcodes.

Canada Post Off - Default:
Scan this barcode to disable decoding of Canada Post barcodes.

Reverse BC412 On:
Scan this barcode to enable reading BC412 encoded barcodes that are encoded in reverse.

Codabar On - Default:
Scan this barcode to enable decoding of Codabar barcodes.

Reverse BC412 Off - Default:
Scan this barcode to disable reading BC412 encoded barcodes that are encoded in reverse.

Codabar Off:
Scan this barcode to disable decoding of Codabar barcodes.

Codabar Checksum On:
Scan this barcode to enable the enforcement of a valid checksum calculation when reading Codabar barcodes.

Codabar Checksum Off - Default:
Scan this barcode to disable the enforcement of a valid checksum calculation when reading Codabar barcodes.

Remove Codabar Start and Stop Delimiters:
Scan this barcode to remove the Codabar Start and Stop characters from the data output when reading the Codabar Symbology

Keep Codabar Start and Stop Delimiters - Default:
Scan this barcode to maintain the Codabar Start and Stop characters in the data output when reading the Codabar Symbology

Codablock F On:
Scan this barcode to enable decoding of Codablock F barcodes.

Codablock F Off - Default:
Scan this barcode to disable decoding of Codablock F barcodes.

Code 11 Checksum Stripped from Result On:
Scan this barcode to remove the calculated checksum from Code 11 barcode data when transmitting.

Code 11 Checksum Stripped from Result Off - Default:
Scan this barcode to leave the calculated checksum in Code 11 barcode data when transmitting.

Code 11 On:
Scan this barcode to enable decoding of Code 11 barcodes (with or without checksums).

Code 11 Off - Default:
Scan this barcode to disable decoding of Code 11 barcodes (with or without checksums).

Code 11 One Digit Checksum:
Scan this barcode to require a one digit checksum for Code 11 barcodes.

Code 11 Disable Checksum Checking - Default:
Scan this barcode to disable the enforcement of a valid checksum calculation when reading Code 11 barcodes.

Code 11 Two Digit Checksum - Default:
Scan this barcode to require a two digit checksum for Code 11 barcodes.

Code 49 On:
Scan this barcode to enable reading Code 49 encoded barcodes.

Code 49 Off - Default:
Scan this barcode to disable reading Code 49 encoded barcodes.

Code 128 Off:
Scan this barcode to disable decoding of Code 128 barcodes.

Code 128 On - Default:
Scan this barcode to enable decoding of Code 128 barcodes.

Code 32 (Italian Pharmacode) On:
Scan this barcode to enable decoding of Code 32 (Italian Pharmacode) barcodes.

Code 32 (Italian Pharmacode) Off - Default:
Scan this barcode to disable decoding of Code 32 (Italian Pharmacode) barcodes.

Code 39 On - Default:
Scan this barcode to enable decoding of Code 39 barcodes.

Code 39 Off:
Scan this barcode to disable decoding of Code 39 barcodes.

Code 39 Checksum On:
Scan this barcode to enable the enforcement of a valid checksum calculation when reading Code 39 barcodes.

Code 39 Checksum Off - Default:
Scan this barcode to disable the enforcement of a valid checksum calculation when reading Code 39 barcodes.

Code 39 Checksum Stripped from Result On:
Scan this barcode to remove the calculated checksum from Code 39 barcode data when transmitting.

Code 93 On - Default:
Scan this barcode to enable reading Code 93 encoded barcodes.

Code 93 Off:
Scan this barcode to disable reading Code 93 encoded barcodes.

Composite On:
Scan this barcode to enable decoding of 1D/2D composite barcodes.

Composite Off - Default:
Scan this barcode to disable decoding of 1D/2D composite barcodes.

Data Matrix On - Default:
Scan this barcode to enable decoding of Data Matrix barcodes.

Data Matrix Off:
Scan this barcode to disable decoding of Data Matrix barcodes.

Data Matrix Mirror On:
Scan this barcode to enable decoding of mirrored Data Matrix barcodes.

Data Matrix Mirror Off - Default:
Scan this barcode to disable decoding of mirrored Data Matrix barcodes.

Data Matrix Inverse and Normal On - Default:
Scan this barcode to enable decoding of inverse (i.e. light barcode on a dark background) and normal Data Matrix barcodes.

Data Matrix Inverse Off:
Scan this barcode to disable decoding of inverse Data Matrix barcodes.

Data Matrix Rectangular On - Default:
Scan this barcode to enable decoding of Data Matrix Rectangular barcodes.

Data Matrix Rectangular Off:
Scan this barcode to disable decoding of Data Matrix Rectangular barcodes.

Data Matrix Rectangular Extended On:
Scan this barcode to enable decoding of Data Matrix Rectangular Extended barcodes.

Data Matrix Rectangular Extended Off - Default:
Scan this barcode to disable decoding of Data Matrix Rectangular Extended barcodes.

Grid Matrix On:
Scan this barcode to enable decoding of Grid Matrix barcodes.

Grid Matrix Off - Default:
Scan this barcode to disable decoding of Grid Matrix barcodes.

GS1 DataBar On - Default:
Scan this barcode to enable decoding of GS1 DataBar (Stacked, Omnidirectional, Expanded, Limited, Truncated) barcodes.

GS1 DataBar Off:
Scan this barcode to disable decoding of GS1 DataBar (Stacked, Omnidirectional, Expanded, Limited, Truncated) barcodes.

Han Xin On:
Scan this barcode to enable decoding of Han Xin barcodes.

Han Xin Off - Default:
Scan this barcode to disable decoding of Han Xin barcodes.

Han Xin Mirror On:
Scan this barcode to enable decoding of mirrored Han Xin barcodes.

Han Xin Mirror Off - Default:
Scan this barcode to disable decoding of mirrored Han Xin barcodes.

Han Xin Inverse On:
Scan this barcode to enable decoding of inverse (i.e. light barcode on a dark background) Han Xin barcodes.

Han Xin Inverse Off - Default:
Scan this barcode to disable decoding of inverse (i.e. light barcode on a dark background) Han Xin barcodes.

Hong Kong 2 of 5 On:
Scan this barcode to enable decoding of Hong Kong 2 of 5 barcodes.

Hong Kong 2 of 5 Off - Default:
Scan this barcode to disable decoding of Hong Kong 2 of 5 barcodes.

Interleaved 2 of 5 On - Default:
Scan this barcode to enable decoding of Interleaved 2 of 5 barcodes.

Interleaved 2 of 5 Off:
Scan this barcode to disable decoding of Interleaved 2 of 5 barcodes.

Interleaved 2 of 5 Checksum On:
Scan this barcode to enable the enforcement of a valid checksum calculation when reading Interleaved 2 of 5 barcodes.

Interleaved 2 of 5 Checksum Off - Default:
Scan this barcode to disable the enforcement of a valid checksum calculation when reading Interleaved 2 of 5 barcodes.

Interleaved 2 of 5 Checksum Stripped from Result On:
Scan this barcode to remove the calculated checksum from Interleaved 2 of 5 barcode data when transmitting.

Interleaved 2 of 5 Checksum Stripped from Result Off - Default:
Scan this barcode to leave the calculated checksum in Interleaved 2 of 5 barcode data when transmitting.

Japan Post On:
Scan this barcode to enable decoding of Japan Post barcodes.

Japan Post Off - Default:
Scan this barcode to disable decoding of Japan Post barcodes.

KIX (Dutch Post) On:
Scan this barcode to enable decoding of KIX (Dutch Post) barcodes.

KIX (Dutch Post) Off - Default:
Scan this barcode to disable decoding of KIX (Dutch Post) barcodes.

Korean Post On:
Scan this barcode to enable decoding of Korean Post barcodes.

Korean Post Off - Default:
Scan this barcode to disable decoding of Korean Post barcodes.

Matrix 2 of 5 On:
Scan this barcode to enable decoding of Matrix 2 of 5 barcodes.

Matrix 2 of 5 Off - Default:
Scan this barcode to disable decoding of Matrix 2 of 5 barcodes.

Maxicode On:
Scan this barcode to enable decoding of Maxicode barcodes.

Maxicode Off - Default:
Scan this barcode to disable decoding of Maxicode barcodes.

Micro PDF417 On:
Scan this barcode to enable decoding of Micro PDF417 barcodes.

Micro PDF417 Off - Default:
Scan this barcode to disable decoding of Micro PDF417 barcodes.

Micro QR Code On:
Scan this barcode to enable decoding of Micro QR Code barcodes.

Micro QR Code Off - Default:
Scan this barcode to disable decoding of Micro QR Code barcodes.

Mode 1 QR Code On:
Scan this barcode to enable decoding of Mode 1 QR Code barcodes.

Mode 1 QR Code Off - Default:
Scan this barcode to disable decoding of Mode 1 QR Code barcodes.

MSI Plessey Checksum Must Be Mod 10:
Scan this barcode to enable the enforcement of a valid checksum calculation when reading MSI Plessey barcodes.

MSI Plessey Checksum Off - Default:
Scan this barcode to disable the enforcement of a valid checksum calculation when reading MSI Plessey barcodes.

MSI Plessey Checksum Stripped from Result On:
Scan this barcode to remove the calculated checksum from MSI Plessey barcode data when transmitting.

MSI Plessey Checksum Stripped from Result Off - Default:
Scan this barcode to leave the calculated checksum in MSI Plessey barcode data when transmitting.

MSI Plessey Checksum Must Be Mod 11/10:
Scan this barcode to require a Mod 10/11 checksum when caclulating a valid checksum when reading MSI Plessey barcodes.

MSI Plessey Checksum Must Be Mod 10/10:
Scan this barcode to require a Mod 10/10 checksum when caclulating a valid checksum when reading MSI Plessey barcodes.

MSI Plessey On:
Scan this barcode to enable decoding of MSI Plessey barcodes.

MSI Plessey Off - Default:
Scan this barcode to disable decoding of MSI Plessey barcodes.

NEC 2 of 5 Checksum On - Default:
Scan this barcode to enable decoding only those NEC 2 of 5 barcodes with a valid checksum.

NEC 2 of 5 Checksum Off:
Scan this barcode to enable decoding of NEC 2 of 5 barcodes with or without a valid checksum.

NEC 2 of 5 On:
Scan this barcode to enable decoding of NEC 2 of 5 barcodes.

NEC 2 of 5 Off - Default:
Scan this barcode to disable decoding of NEC 2 of 5 barcodes.

PDF417 On - Default:
Scan this barcode to enable decoding of PDF417 barcodes.

PDF417 Off:
Scan this barcode to disable decoding of PDF417 barcodes.

Pharmacode On:
Scan this barcode to enable decoding of Pharmacode barcodes.

Pharmacode Off - Default:
Scan this barcode to disable decoding of Pharmacode barcodes.

Pharmacode Normal Barcode Decoding (Left to Right) - Default:
Scan this barcode to disable decoding of Pharmacode barcodes that were encoded normally (from left to right).

Pharmacode Reverse Barcode Decoding (Right to Left):
Scan this barcode to enable decoding of Pharmacode barcodes that were encoded in reverse (from right to left).

QR Code On - Default:
Scan this barcode to enable decoding of QR Code barcodes.

QR Code Off:
Scan this barcode to disable decoding of QR Code barcodes.

QR Code Standard Only - Default:
Scan this barcode to decode only standard QR Code barcodes.

QR Code Mirror On:
Scan this barcode to enable decoding of mirrored QR Code barcodes.

QR Code Mirror Off - Default:
Scan this barcode to disable decoding of mirrored QR Code barcodes.

QR Code Inverse and Normal On:
Scan this barcode to disable decoding of inverse (i.e. light barcode on a dark background) and normal QR Code barcodes.

QR Code Inverse Only:
Scan this barcode to decode only inverse (i.e. light barcode on a dark background) QR Code barcodes.

Telepen On:
Scan this barcode to enable decoding of Telepen barcodes.

Telepen Off - Default:
Scan this barcode to disable decoding of Telepen barcodes.

Output Telepen as Numeric - Default:
Scan this barcode to enable the output of barcodes encoded in the Telepen symbology to be returned as numerals.

Output Telepen as ASCII:
Scan this barcode to enable the output of barcodes encoded in the Telepen symbology to be returned as ASCII characters.

Trioptic On:
Scan this barcode to enable decoding of Trioptic barcodes.

Trioptic Off - Default:
Scan this barcode to disable decoding of Trioptic barcodes.

Reverse Trioptic On:
Scan this barcode to enable the reversing the first and second halves of a Trioptic barcode.

Reverse Trioptic Off - Default:
Scan this barcode to disable the reversing the first and second halves of a Trioptic barcode.

Keep Trioptic Start and Stop Delimiters:
Scan this barcode to maintain the Trioptic Start and Stop characters in the data output when reading the Trioptic Symbology.

Remove Trioptic Start and Stop Delimiters - Default:
Scan this barcode to remove the Trioptic Start and Stop characters from the data output when reading the Trioptic Symbology.

Straight 2 of 5 Off - Default:
Scan this barcode to disable decoding of Straight 2 of 5 barcodes.

Straight 2 of 5 On:
Scan this barcode to enable decoding of Straight 2 of 5 barcodes.

UK Plessey On:
Scan this barcode to enable reading UK Plessey barcodes.

UK Plessey Off - Default:
Scan this barcode to disable reading UK Plessey barcodes.

UK Royal Mail On:
Scan this barcode to enable decoding of UK Royal Mail barcodes.

UK Royal Mail Off - Default:
Scan this barcode to disable decoding of UK Royal Mail barcodes.

UPC/EAN On - Default:
Scan this barcode to enable decoding of UPC-A, UPC-E, EAN-13, and EAN-8 barcodes.

UPC/EAN Off:
Scan this barcode to disable decoding of UPC-A, UPC-E, EAN-13, and EAN-8 barcodes.

UPC Supplemental On:
Scan this barcode to enable the reading of two or five digit supplemental UPC/EAN barcodes.

UPC Supplemental Off - Default:
Scan this barcode to disable the reading of two or five digit supplemental UPC/EAN barcodes.

UPC E Expansion On:
Scan this barcode to enable the expantion of UPC-E barcodes to UPC-A barcodes.

UPC E Expansion Off - Default:
Scan this barcode to disable the expantion of UPC-E barcodes to UPC-A barcodes.

Convert UPC-A to EAN-13:
Scan this barcode to enable the conversion of UPC-A data to the EAN-13 format when a UPC-A barcode is read.

Do Not Convert UPC-A to EAN-13 - Default:
Scan this barcode to disable the conversion of UPC-A data to the EAN-13 format when a UPC-A barcode is read.

Transmit UPC-A Check Digit:
Scan this barcode to enable transmission of the UPC-A check digit along with the barcode data when an UPC-A barcode is read.

Do Not Transmit UPC-A Check Digit - Default:
Scan this barcode to disable transmission of the UPC-A check digit along with the barcode data when an UPC-A barcode is read.

Transmit UPC-A Number System:
Scan this barcode to enable transmission of the UPC-A number system digits along with the barcode data when an UPC-A barcode is read.

Do Not Transmit UPC-A Number System - Default:
Scan this barcode to disable transmission of the UPC-A number system digits along with the barcode data when an UPC-A barcode is read.

Do Not Transmit UPC-E Check Digit - Default:
Scan this barcode to disable transmission of the UPC-E check digit along with the barcode data when an UPC-E barcode is read.

Transmit UPC-E Number System:
Scan this barcode to enable transmission of the UPC-E number system digits along with the barcode data when an UPC-E barcode is read.

Do Not Transmit UPC-E Number System - Default:
Scan this barcode to disable transmission of the UPC-E number system digits along with the barcode data when an UPC-E barcode is read.

Convert EAN-8 to EAN-13:
Scan this barcode to enable the conversion of EAN-8 data to the EAN-13 format when an EAN-8 barcode is read.

Do Not Convert EAN-8 to EAN-13 - Default:
Scan this barcode to disable the conversion of EAN-8 data to the EAN-13 format when an EAN-8 barcode is read.

Transmit UPC-E Check Digit:
Scan this barcode to enable transmission of the UPC-E check digit along with the barcode data when an UPC-E barcode is read.

Convert Bookland EAN-13 to ISBN:
Scan this barcode to enable the conversion of Bookland EAN-13 data to the ISBN format when a Bookland EAN-13 barcode is read.

Do Not Convert Bookland EAN-13 to ISBN - Default:
Scan this barcode to disable the conversion of Bookland EAN-13 data to the ISBN format when a Bookland EAN-13 barcode is read.

Convert Bookland EAN-13 to ISSN:
Scan this barcode to enable the conversion of Bookland EAN-13 data to the ISSN format when a Bookland EAN-13 barcode is read.

Do Not Convert Bookland EAN-13 to ISSN - Default:
Scan this barcode to disable the conversion of Bookland EAN-13 data to the ISSN format when a Bookland EAN-13 barcode is read.

Transmit EAN-8 Check Digit:
Scan this barcode to enable transmission of the EAN-8 check digit along with the barcode data when an EAN-8 barcode is read.

Do Not Transmit EAN-8 Check Digit - Default:
Scan this barcode to disable transmission of the EAN-8 check digit along with the barcode data when an EAN-8 barcode is read.

Transmit EAN-13 Check Digit:
Scan this barcode to enable transmission of the EAN-13 check digit along with the barcode data when an EAN-13 barcode is read.

Do Not Transmit EAN-13 Check Digit - Default:
Scan this barcode to disable transmission of the EAN-13 check digit along with the barcode data when an EAN-13 barcode is read.

UPU ID Tags On:
Scan this barcode to enable decoding of UPU ID Tags barcodes.

UPU ID Tags Off - Default:
Scan this barcode to disable decoding of UPU ID Tags barcodes.

USPS Intelligent Mail On:
Scan this barcode to enable decoding of USPS Intelligent Mail barcodes.

USPS Intelligent Mail Off - Default:
Scan this barcode to disable decoding of USPS Intelligent Mail barcodes.

USPS Planet On:
Scan this barcode to enable decoding of USPS Planet barcodes.

USPS Planet Off - Default:
Scan this barcode to disable decoding of USPS Planet barcodes.

USPS Postnet On:
Scan this barcode to enable decoding of USPS Postnet barcodes.

USPS Postnet Off - Default:
Scan this barcode to disable decoding of USPS Postnet barcodes.

Enable GS1 DataBar Limited - Default:
Scan this barcode to enable reading GS1 DataBar Limited barcodes.

Disable GS1 DataBar Limited:
Scan this barcode to disable reading GS1 DataBar Limited barcodes.

Enable GS1 DataBar Expanded Stacked - Default:
Scan this barcode to enable reading GS1 DataBar Expanded Stacked barcodes.

Disable GS1 DataBar Expanded Stacked:
Scan this barcode to disable reading GS1 DataBar Expanded Stacked barcodes.

Enable GS1 DataBar Expanded - Default:
Scan this barcode to enable reading GS1 DataBar Expanded barcodes.

Disable GS1 DataBar Expanded:
Scan this barcode to disable reading GS1 DataBar Expanded barcodes.

Enable GS1 DataBar Stacked and GS1 DataBar Stacked Omnidirectional - Default:
Scan this barcode to enable reading GS1 DataBar Stacked and GS1 DataBar Stacked Omnidirectional barcodes.

Disable GS1 DataBar Stacked and GS1 DataBar Stacked Omnidirectional:
Scan this barcode to disable reading GS1 DataBar Stacked and GS1 DataBar Stacked Omnidirectional barcodes.

Grid Matrix Inverse On:
Scan this barcode to enable decoding of inverse (i.e. light barcode on a dark background) Grid Matrix barcodes.

Grid Matrix Inverse Off - Default:
Scan this barcode to disable decoding of inverse Grid Matrix barcodes.

Grid Matrix Mirror On:
Scan this barcode to enable decoding of mirrored Data Matrix barcodes.

BC412 On:
Scan this barcode to enable decoding of BC412 barcodes.

BC412 Off - Default:
Scan this barcode to disable decoding of BC412 barcodes.

Disable GS1 DataBar Omnidirectional and GS1 DataBar Truncated:
Scan this barcode to disable reading GS1 DataBar Omnidirectional and GS1 DataBar Truncated.

Grid Matrix Mirror Off - Default:
Scan this barcode to disable decoding of mirrored Data Matrix barcodes.

Royal Mail Checksum On:
Scan this barcode to enable the enforcement of a valid checksum calculation when reading Royal Mail barcodes.

Royal Mail Checksum Off:
Scan this barcode to disable the enforcement of a valid checksum calculation when reading Royal Mail barcodes.

Pharmacode Color On:
Scan this barcode to enable reading Pharmacode barcodes that contain color bars.

Pharmacode Color Off - Default:
Scan this barcode to disable reading Pharmacode barcodes that contain color bars.

Custom QR Code On:
Scan this barcode to enable reading Custom QR Code barcodes.

Custom QR Code Off - Default:
Scan this barcode to disable reading Custom QR Code barcodes.

Han Xin Normal and Inverse On:
Scan this barcode to enable decoding of normal (i.e. dark barcode on a light background) and inverse (i.e. light barcode on a dark background) Han Xin barcodes.

Aztec Mirror On:
Scan this barcode to enable decoding of mirrored Aztec barcodes.

Aztec Mirror Off - Default:
Scan this barcode to disable decoding of mirrored Aztec barcodes.

Code 39 Extended Full ASCII Off - Default:
When on, reader will decode Code 39 barcodes encoding the full set of ASCII characters (128 characters). Turn off to disable this feature.

Code 39 Extended Full ASCII On:
When on, reader will decode Code 39 barcodes encoding the full set of ASCII characters (128 characters). Turn off to disable this feature.

Enable GoCode & GoCode Mirror Decoding:
Scan this barcode to enable reading of GoCode & GoCode Mirror

Set Portuguese for Windows as active language:
Set Portuguese for Windows as active language

Set Italian for Windows as active language:
Set Italian for Windows as active language

Keyboard Support: Simplified Chinese Keyboard Mapping for Windows:
Keyboard Support: Simplified Chinese Keyboard Mapping for Windows

List Installed Languages:
Scan this barcode to return a list of the installed keyboard languages.

Get Active Language:
Scan this barcode to return the current active language of data transmission (keyboard only).

Keyboard Support: US English Keyboard Mapping for Windows - Default:
Scan this barcode to use a US English keyboard map for Windows devices.

Keyboard Support: English Keyboard Mapping for Apple:
Scan this barcode to use an English keyboard map for Apple devices.

Keyboard Support: French-Belgian Keyboard Mapping for Windows:
Scan this barcode to use a Belgian French keyboard map for Windows devices.

Keyboard Support: French Keyboard Mapping for Windows:
Scan this barcode to use a French keyboard map for Windows devices.

Keyboard Support: French Keyboard Mapping for Apple:
Scan this barcode to use a French keyboard map for Apple devices.

Keyboard Support: German Keyboard Mapping for Apple:
Scan this barcode to use a German keyboard map for Apple devices.

Keyboard Support: German Keyboard Mapping for Windows:
Scan this barcode to use a German keyboard map for Windows devices.

Keyboard Support: German-Swiss Keyboard Mapping for Apple:
Scan this barcode to use a Swiss German keyboard map for Apple devices.

Keyboard Support: German-Swiss Keyboard Mapping for Windows:
Scan this barcode to use a Swiss German keyboard map for Windows devices.

Keyboard Support: Italian Keyboard Mapping for Apple:
Scan this barcode to use an Italian keyboard map for Apple devices.

Keyboard Support: Japanese Keyboard Mapping for Windows:
Scan this barcode to use a Japanese keyboard map for Windows devices.

Keyboard Support: Russian Keyboard Mapping for Windows:
Scan this barcode to use a Russian keyboard map for Windows devices.

Keyboard Support: Spanish-Latin American Keyboard Mapping for Windows:
Scan this barcode to use a Latin American Spanish keyboard map for Windows devices.

Keyboard Support: Spanish Keyboard Mapping for Windows:
Scan this barcode to use a Spanish keyboard map for Windows devices.

Keyboard Support: Spanish Keyboard Mapping for Apple:
Scan this barcode to use a Spanish keyboard map for Apple devices.

Keyboard Support: UK English Keyboard Mapping for Windows:
Scan this barcode to use a UK English keyboard map for Windows devices.

Keyboard Support: US International (Universal) Keyboard Mapping for Windows:
Keyboard Support: US International (Universal) Keyboard Mapping with Leading 0 for Non-printable ASCII for Windows

Data Encoding: Raw ASCII to Keyboard XML File Lookup - Default:
Scan this barcode to define the input encoding as ASCII and output based on current keyboard language settings.

Data Encoding: UTF8 to Unicode Codepoint - Alt Sequences for Windows:
Scan this barcode to define the input encoding as UTF-8 and do an intermediate conversion of the output to Unicode codepoints and output as Windows Alt sequences.

Data Encoding: ASCII to Unicode Codepoint - Alt Sequences for Windows:
Scan this barcode to define the input encoding as ASCII and do an intermediate conversion of the output to Unicode codepoints and output as Windows Alt sequences.

Control Character Input - Language Default - Default - Default:
Scan this barcode to use the language file default handling of non-printable characters. This applies to Windows language files only.

Control Character Input - Ctrl + Character:
Scan this barcode to use Control+Character handling of non-printable characters. This applies to Windows language files only.

Control Character Input - Alt + Keypad:
Scan this barcode to use Alt+Keypad Numbers with No Leading Zero handling of non-printable characters. This applies to Windows language files only.

Control Character Input -Alt + Leading Zero:
Scan this barcode to use Alt+Keypad Numbers with Leading Zero handling of non-printable characters. This applies to Windows language files only.

Alternate Operating System (Linux/Mac) On:
Scan this barcode to enable Alternate OS mode. This could enhance communications on some non-Microsoft operating systems.

Alternate Operating System (Linux/Mac) Off - Default:
Scan this barcode to disable Alternate OS mode. This optimizes communications for Microsoft Windows.

USB HID Vendor Mode:
Scan this barcode to place the reader in USB HID Vendor Mode. This mode allows file transfer to/from the reader. File types eligible for transfer include firmware, configuration, and images (also default mode for CortexTools).

USB Keyboard Mode - Default:
Scan this barcode to transmit barcode data as keyboard data via USB.

Enable HID POS Mode:
Scan this code to place the reader in HID POS mode, where it will communicate using the Human Interface Device class and Point of Sale usage as outlined in usb.org implementation documents. This code will also enable AIM ID.

Enable CDC VCOM Mode:
Scan this barcode to enable support for the communications device class (CDC) interface on Linux.

Enable USB VCOM mode:
Scan this barcode to use Virtual COM mode to transfer batch data. The reader will talk to a virtual COM port on the host device and transmit data serially (i.e. like an RS232 device).

Enable USB OPOS/JPOS Mode - Default:
Scan this barcode to configure a USB reader for OPOS/JPOS communication.

USB Virtual COM Multiple Ports:
Scan this barcode to have the reader tell the Virtual COM driver to setup a new virtual COM port when the reader is connected to the host.

USB Virtual COM Common Ports:
Scan this barcode to have the reader tell the Virtual COM driver to connect this reader on an already-established virtual COM port.

Reset to RS232 Factory Defaults:
Scan this barcode to restore the reader to RS232 defaults (RS232 Communication Mode, 115200 baud, eight data bits, no parity, one stop bit).

RS232 Interface - 1200 Baud Rate:
Scan this barcode to set the modulation rate for RS232 data being sent to a host to 1200 baud. The baud rate for the reader must match the host's baud rate.

RS232 Interface - 2400 Baud Rate:
Scan this barcode to set the modulation rate for RS232 data being sent to a host to 2400 baud. The baud rate for the reader must match the host's baud rate.

RS232 Interface - 4800 Baud Rate:
Scan this barcode to set the modulation rate for RS232 data being sent to a host to 4800 baud. The baud rate for the reader must match the host's baud rate.

RS232 Interface - 9600 Baud Rate:
Scan this barcode to set the modulation rate for RS232 data being sent to a host to 9600 baud. The baud rate for the reader must match the host's baud rate.

RS232 Interface - 19200 Baud Rate:
Scan this barcode to set the modulation rate for RS232 data being sent to a host to 19200 baud. The baud rate for the reader must match the host's baud rate.

RS232 Interface - 38400 Baud Rate:
Scan this barcode to set the modulation rate for RS232 data being sent to a host to 38400 baud. The baud rate for the reader must match the host's baud rate.

RS232 Interface - 57600 Baud Rate:
Scan this barcode to set the modulation rate for RS232 data being sent to a host to 57600 baud. The baud rate for the reader must match the host's baud rate.

RS232 Interface - 115200 Baud Rate - Default:
Scan this barcode to set the modulation rate for RS232 data being sent to a host to 115200 baud. The baud rate for the reader must match the host's baud rate.

RS232 Interface - 7 Data Bits:
Scan this barcode to set the number of data bits used for RS232 data transmission to seven. The data bit setting for the reader must match the host's data bit setting.

RS232 Interface - 8 Data Bits - Default:
Scan this barcode to set the number of data bits used for RS232 data transmission to eight. The data bit setting for the reader must match the host's data bit setting.

RS232 Interface - 1 Stop Bit - Default:
Scan this barcode to set the number of stop bits used for RS232 data transmission to one stop bit. The stop bit setting for the reader must match the host's stop bit setting

RS232 Interface - 2 Stop Bits:
Scan this barcode to set the number of stop bits used for RS232 data transmission to two stop bits. The stop bit setting for the reader must match the host's stop bit setting

RS232 Interface - Even Parity:
Scan this barcode to add a parity bit to RS232 data transmissions for error checking. Parity can be odd, even, or turned off (i.e. "No Parity"). The parity setting for the reader must match the host's parity setting.

RS232 Interface - No Parity:
Scan this barcode to turn off the parity bit for RS232 data transmissions. The parity setting for the reader must match the host's parity setting.

RS232 Interface - Odd Parity:
Scan this barcode to add a parity bit to RS232 data transmissions for error checking. Parity can be odd, even, or turned off (i.e. "No Parity"). The parity setting for the reader must match the host's parity setting.

RS232 Interface Flow Control On:
Scan this barcode to enable the utilization of the Request To Send (RTS) and Clear To Send (CTS) lines to regulate RS232 data transmission. The host must be setup to operate the signal lines appropriately.

RS232 Interface Flow Control Off - Default:
Scan this barcode to disable the utilization of the Request To Send (RTS) and Clear To Send (CTS) lines to regulate RS232 data transmission. The host must be setup to operate the signal lines appropriately.

Enable Packet Mode:
Scan this barcode to set packet mode. This means that the reader will send data using packets to verify accurate communication. This includes leveraging framing, a checksum, and software flow control (ACK/NAK). See ICD for packet information

Enable Raw Mode - Default:
Scan this barcode to set raw mode. This means that the reader will send data as is. See ICD for packet information

Enable Serial, Raw, and Echo Communications:
Scan this barcode to get the reader in RS232 communication mode as well as get the reader to output raw and echo modes.

Enable RS232 OPOS/JPOS Mode - Default:
Scan this barcode to configure an RS232 reader for OPOS/JPOS communication.

Enable RS232 Interface Flow Control - One-Way:
RS232 Interface Flow Control - One-Way

Disable Duplicate Scan Delay - Default:
Scan this barcode to turn off the delay between scans of the same barcode.

1 Second Duplicate Scan Delay:
Scan this barcode to set a 1 second delay between scans of the same barcode (i.e. the amount of time you must wait after scanning a barcode before you can scan that same barcode again unless you scan a different barcode first).

2 Second Duplicate Scan Delay:
Scan this barcode to set a 2 second delay between scans of the same barcode (i.e. the amount of time you must wait after scanning a barcode before you can scan that same barcode again unless you scan a different barcode first).

3 Second Duplicate Scan Delay:
Scan this barcode to set a 3 second delay between scans of the same barcode (i.e. the amount of time you must wait after scanning a barcode before you can scan that same barcode again unless you scan a different barcode first).

5 Second Duplicate Scan Delay:
Scan this barcode to set a 5 second delay between scans of the same barcode (i.e. the amount of time you must wait after scanning a barcode before you can scan that same barcode again unless you scan a different barcode first).

10 Second Duplicate Scan Delay:
Scan this barcode to set a 10 second delay between scans of the same barcode (i.e. the amount of time you must wait after scanning a barcode before you can scan that same barcode again unless you scan a different barcode first).

30 Second Duplicate Scan Delay:
Scan this barcode to set a 30 second delay between scans of the same barcode (i.e. the amount of time you must wait after scanning a barcode before you can scan that same barcode again unless you scan a different barcode first).

1 Hour Duplicate Scan Delay:
Scan this barcode to set a 1 hour delay between scans of the same barcode (i.e. the amount of time you must wait after scanning a barcode before you can scan that same barcode again unless you scan a different barcode first).

1 Day Duplicate Scan Delay:
Scan this barcode to set a 1 day delay between scans of the same barcode (i.e. the amount of time you must wait after scanning a barcode before you can scan that same barcode again unless you scan a different barcode first).

Enable Upload Image Mode:
Scan this barcode to enable Upload Image Mode. This means that each image captured by the reader will be sent as a stream of data to the host.

Disable Upload Image Mode - Default:
Scan this barcode to disable Upload Image Mode.

Reader Information, limited, 1500:
Scan this barcode to receive Reader Model number, serial number, firmware version and Licenses

Reset to Factory Defaults:
Scan this barcode to restore the reader to the factory settings.

Save All Reader Settings:
Scan this barcode to save any temporary changes you have made to reader settings.

Reboot Reader:
Scan this barcode to reboot (power down and restart) the reader.

Enable Verifone (Ruby) Defaults:
Sets the reader to communicate to a Verifone Ruby (or Sapphire) terminal via RS232.

Enable Gilbarco:
Scan this barcode to enable output data formatted for GILBARCO terminal

Disable Gilbarco - Default:
Scan this barcode to disable output data formatted for GILBARCO terminal

Enable NCR:
Scan this barcode to enable output data formatted for NCR terminal

Disable NCR - Default:
Scan this barcode to disable output data formatted for NCR terminal

Enable NCR2:
Scan this barcode to enable output data formatted for NCR2 terminal

Disable NCR2 - Default:
Scan this barcode to disable output data formatted for NCR2 terminal

Disable WINCNIX - Default:
Scan this barcode to enable output data formatted for WINCNIX terminal

Enable WINCNIX:
Scan this barcode to disable output data formatted for WINCNIX terminal

Enable UDI/HIBC Validation:
Scan this barcode to enable validation of UDI/HIBC data structures contained in barcodes. Only one validation can be active at a time.

Enable ISO15434 Validation:
Scan this barcode to enable validation of ISO15434 data structures contained in barcodes. Only one validation can be active at a time.

Enable ISO15434 & ISO15418 Validation:
Scan this barcode to enable validation of ISO15434 & ISO15418 data structures contained in barcodes. Only one validation can be active at a time.

CR5000AV Barcode Generator:
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat..

Select a Settings Category From the Left.

General Reading Mode Settings

[print section - save section]

Continuous Scan Mode On

Select	Configuration Options	Value	Reader Behavior
	Set Lock PIN (4-8 numeric characters)		Lock reader settings until unlock PIN provided
	Unlock Reader and Clear PIN		Allows reader settings to be changed and clears PIN
	Set Under Age		Red LED
-	Middle Age Range or Undetermined Age	-	Yellow LED
	Set Over Age		Green LED
	Set Real Time Clock (RTC)	-	Sets RTC to current date and time

Content on this page requires a newer version of Adobe Flash Player.