Select All

 
Print All

 
Save All

View Selected


Settings Categories
      1. Enable Stand Detection - Default
      2. Disable Stand Detection
      3. Motion Detect Off (Out of Stand) - Default
      4. Motion Detect Always On
      5. No Motion Detection Delay
      6. 500ms Motion Detection Delay - Default
      7. Enable Cell Phone Reading Enhancement
      8. Disable Cell Phone Reading Enhancement - Default
      9. Set Motion Detect Maximum Brightness to 25%
      10. Set Motion Detect Maximum Brightness to 50%
      11. Set Motion Detect Maximum Brightness to 75%
      12. Set Motion Detect Maximum Brightness to 100% - Default
      13. Enable Target LED During Image Capture - Default
      14. Disable Target LED During Image Capture
      15. Trigger Mode On In Stand
      16. Motion Detection On In Stand - Default
      17. Continuous Scan Mode On In Stand
      18. Enable Stand Detection - Default
      19. Disable Stand Detection
      20. Reader Text Commands Off - Default
      21. Reader Text Commands On
      22. Targeting On - Default
      23. Enable Targeting-Always-On
      24. Beep Volume 0%
      25. Beep Volume 33%
      26. Beep Volume 67%
      27. Beep Volume 100% - Default
      1. Disable Data Formatting - Default
      2. Prefix Comma
      3. Prefix Space
      4. Prefix Tab (USB Keyboard Mode Only)
      5. Prefix Tab (RS232 Mode Only)
      6. Erase Prefix Data
      7. Suffix Comma
      8. Suffix Space
      9. Suffix Enter (USB Keyboard Mode Only)
      10. Suffix Tab (USB Keyboard Mode Only)
      11. Suffix Tab (RS232 Mode Only)
      12. Suffix Carriage Return (RS232 Mode Only)
      13. Suffix Carriage Return Line Feed (RS232 Mode Only) - Default
      14. Suffix Line Feed (RS232 Mode Only)
      15. Erase Suffix Data
      16. Convert Barcode Data to Uppercase
      17. Convert Barcode Data to Lowercase
      18. Convert Barcode Data to Bracketed Hex Output
      19. Erase Prefix & Suffix Data
      20. Prefix AIM ID Off - Default
      21. Prefix AIM ID On
      1. Aztec On - Default
      2. Aztec Off
      3. Aztec Inverse & Normal On
      4. Aztec Inverse Off - Default
      5. Enable BC412 - Disable BC412 Reverse
      6. Disable BC412 Regular and Reverse - Default
      7. Reverse BC412 On
      8. Codabar On - Default
      9. Reverse BC412 Off - Default
      10. Codabar Off
      11. Codabar Checksum On
      12. Codabar Checksum Off - Default
      13. Remove Codabar Start and Stop Delimiters
      14. Keep Codabar Start and Stop Delimiters - Default
      15. Code 11 Checksum Stripped from Result On
      16. Code 11 Checksum Stripped from Result Off - Default
      17. Code 11 On
      18. Code 11 Off - Default
      19. Code 11 One Digit Checksum
      20. Code 11 Disable Checksum Checking - Default
      21. Code 11 Two Digit Checksum - Default
      22. Code 128 Off
      23. Code 128 On - Default
      24. Code 32 (Italian Pharmacode) On
      25. Code 32 (Italian Pharmacode) Off - Default
      26. Code 39 On - Default
      27. Code 39 Off
      28. Code 39 Checksum On
      29. Code 39 Checksum Off - Default
      30. Code 39 Checksum Stripped from Result On
      31. Code 93 On - Default
      32. Code 93 Off
      33. Composite On
      34. Composite Off - Default
      35. Data Matrix On - Default
      36. Data Matrix Off
      37. Data Matrix Mirror On
      38. Data Matrix Mirror Off - Default
      39. Data Matrix Inverse and Normal On - Default
      40. Data Matrix Inverse Off
      41. Data Matrix Rectangular On - Default
      42. Data Matrix Rectangular Off
      43. Data Matrix Rectangular Extended On
      44. Data Matrix Rectangular Extended Off - Default
      45. Hong Kong 2 of 5 On
      46. Hong Kong 2 of 5 Off - Default
      47. Interleaved 2 of 5 On - Default
      48. Interleaved 2 of 5 Off
      49. Interleaved 2 of 5 Checksum On
      50. Interleaved 2 of 5 Checksum Off - Default
      51. Interleaved 2 of 5 Checksum Stripped from Result On
      52. Interleaved 2 of 5 Checksum Stripped from Result Off - Default
      53. Matrix 2 of 5 On
      54. Matrix 2 of 5 Off - Default
      55. Micro PDF417 On
      56. Micro PDF417 Off - Default
      57. Micro QR Code On
      58. Micro QR Code Off - Default
      59. Mode 1 QR Code On
      60. Mode 1 QR Code Off - Default
      61. MSI Plessey Checksum Must Be Mod 10
      62. MSI Plessey Checksum Off - Default
      63. MSI Plessey Checksum Stripped from Result On
      64. MSI Plessey Checksum Stripped from Result Off - Default
      65. MSI Plessey Checksum Must Be Mod 11/10
      66. MSI Plessey Checksum Must Be Mod 10/10
      67. MSI Plessey On
      68. MSI Plessey Off - Default
      69. NEC 2 of 5 Checksum On - Default
      70. NEC 2 of 5 Checksum Off
      71. NEC 2 of 5 On
      72. NEC 2 of 5 Off - Default
      73. PDF417 On - Default
      74. PDF417 Off
      75. QR Code On - Default
      76. QR Code Off
      77. QR Code Standard Only - Default
      78. QR Code Mirror On
      79. QR Code Mirror Off - Default
      80. QR Code Inverse and Normal On
      81. QR Code Inverse Only
      82. Telepen On
      83. Telepen Off - Default
      84. Output Telepen as Numeric - Default
      85. Output Telepen as ASCII
      86. Trioptic On
      87. Trioptic Off - Default
      88. Reverse Trioptic On
      89. Reverse Trioptic Off - Default
      90. Keep Trioptic Start and Stop Delimiters
      91. Remove Trioptic Start and Stop Delimiters - Default
      92. Straight 2 of 5 Off - Default
      93. Straight 2 of 5 On
      94. UK Plessey On
      95. UK Plessey Off - Default
      96. UPC/EAN On - Default
      97. UPC/EAN Off
      98. UPC Supplemental On
      99. UPC Supplemental Off - Default
      100. UPC E Expansion On
      101. UPC E Expansion Off - Default
      102. Convert UPC-A to EAN-13
      103. Do Not Convert UPC-A to EAN-13 - Default
      104. Transmit UPC-A Check Digit
      105. Do Not Transmit UPC-A Check Digit - Default
      106. Transmit UPC-A Number System
      107. Do Not Transmit UPC-A Number System - Default
      108. Do Not Transmit UPC-E Check Digit - Default
      109. Transmit UPC-E Number System
      110. Do Not Transmit UPC-E Number System - Default
      111. Convert EAN-8 to EAN-13
      112. Do Not Convert EAN-8 to EAN-13 - Default
      113. Transmit UPC-E Check Digit
      114. Convert Bookland EAN-13 to ISBN
      115. Do Not Convert Bookland EAN-13 to ISBN - Default
      116. Convert Bookland EAN-13 to ISSN
      117. Do Not Convert Bookland EAN-13 to ISSN - Default
      118. Transmit EAN-8 Check Digit
      119. Do Not Transmit EAN-8 Check Digit - Default
      120. Transmit EAN-13 Check Digit
      121. Do Not Transmit EAN-13 Check Digit - Default
      122. Enable GS1 DataBar Limited - Default
      123. Disable GS1 DataBar Limited
      124. Enable GS1 DataBar Expanded Stacked - Default
      125. Disable GS1 DataBar Expanded Stacked
      126. Enable GS1 DataBar Expanded - Default
      127. Disable GS1 DataBar Expanded
      128. Enable GS1 DataBar Stacked and GS1 DataBar Stacked Omnidirectional - Default
      129. Disable GS1 DataBar Stacked and GS1 DataBar Stacked Omnidirectional
      130. BC412 On
      131. BC412 Off - Default
      132. Disable GS1 DataBar Omnidirectional and GS1 DataBar Truncated
      133. Custom QR Code On
      134. Custom QR Code Off - Default
      135. Han Xin Normal and Inverse On
      136. Aztec Mirror On
      137. Aztec Mirror Off - Default
      138. Code 39 Extended Full ASCII Off - Default
      139. Code 39 Extended Full ASCII On
      1. Set Portuguese for Windows as active language
      2. Set Italian for Windows as active language
      3. Keyboard Support: Simplified Chinese Keyboard Mapping for Windows
      4. List Installed Languages
      5. Get Active Language
      6. Keyboard Support: US English Keyboard Mapping for Windows - Default
      7. Keyboard Support: English Keyboard Mapping for Apple
      8. Keyboard Support: French-Belgian Keyboard Mapping for Windows
      9. Keyboard Support: French Keyboard Mapping for Windows
      10. Keyboard Support: French Keyboard Mapping for Apple
      11. Keyboard Support: German Keyboard Mapping for Apple
      12. Keyboard Support: German Keyboard Mapping for Windows
      13. Keyboard Support: German-Swiss Keyboard Mapping for Apple
      14. Keyboard Support: German-Swiss Keyboard Mapping for Windows
      15. Keyboard Support: Italian Keyboard Mapping for Apple
      16. Keyboard Support: Japanese Keyboard Mapping for Windows
      17. Keyboard Support: Russian Keyboard Mapping for Windows
      18. Keyboard Support: Spanish-Latin American Keyboard Mapping for Windows
      19. Keyboard Support: Spanish Keyboard Mapping for Windows
      20. Keyboard Support: Spanish Keyboard Mapping for Apple
      21. Keyboard Support: UK English Keyboard Mapping for Windows
      22. Keyboard Support: US International (Universal) Keyboard Mapping for Windows
      23. Data Encoding: Raw ASCII to Keyboard XML File Lookup - Default
      24. Data Encoding: UTF8 to Unicode Codepoint - Alt Sequences for Windows
      25. Data Encoding: ASCII to Unicode Codepoint - Alt Sequences for Windows
      26. Control Character Input - Language Default - Default - Default
      27. Control Character Input - Ctrl + Character
      28. Control Character Input - Alt + Keypad
      29. Control Character Input -Alt + Leading Zero
      1. Alternate Operating System (Linux/Mac) On
      2. Alternate Operating System (Linux/Mac) Off - Default
      1. USB HID Vendor Mode
      2. USB Keyboard Mode - Default
      3. Enable HID POS Mode
      4. Enable CDC VCOM Mode
      5. Enable USB VCOM mode
      6. Enable USB OPOS/JPOS Mode - Default
      7. USB Virtual COM Multiple Ports
      8. USB Virtual COM Common Ports
      1. Reset to RS232 Factory Defaults
      2. RS232 Interface - 1200 Baud Rate
      3. RS232 Interface - 2400 Baud Rate
      4. RS232 Interface - 4800 Baud Rate
      5. RS232 Interface - 9600 Baud Rate
      6. RS232 Interface - 19200 Baud Rate
      7. RS232 Interface - 38400 Baud Rate
      8. RS232 Interface - 57600 Baud Rate
      9. RS232 Interface - 115200 Baud Rate - Default
      10. RS232 Interface - 7 Data Bits
      11. RS232 Interface - 8 Data Bits - Default
      12. RS232 Interface - 1 Stop Bit - Default
      13. RS232 Interface - 2 Stop Bits
      14. RS232 Interface - Even Parity
      15. RS232 Interface - No Parity
      16. RS232 Interface - Odd Parity
      17. RS232 Interface Flow Control On
      18. RS232 Interface Flow Control Off - Default
      19. Enable Packet Mode
      20. Enable Raw Mode - Default
      21. Enable RS-232 Serial mode - Default
      22. Enable Serial, Raw, and Echo Communications
      23. Enable RS232 OPOS/JPOS Mode - Default
      24. Enable RS232 Interface Flow Control - One-Way
      1. Disable Duplicate Scan Delay - Default
      2. 1 Second Duplicate Scan Delay
      3. 2 Second Duplicate Scan Delay
      4. 3 Second Duplicate Scan Delay
      5. 5 Second Duplicate Scan Delay
      6. 10 Second Duplicate Scan Delay
      7. 30 Second Duplicate Scan Delay
      8. 1 Hour Duplicate Scan Delay
      9. 1 Day Duplicate Scan Delay
      1. Enable Upload Image Mode
      2. Disable Upload Image Mode - Default
      1. Output Reader Configuration
      2. Get Reader Parameters
      1. Reset to Factory Defaults
      2. Save All Reader Settings
      3. Reboot Reader
      1. Enable Gilbarco
      2. Disable Gilbarco - Default
      3. Enable NCR
      4. Disable NCR - Default
      5. Enable NCR2
      6. Disable NCR2 - Default
      7. Disable WINCNIX - Default
      8. Enable WINCNIX
      1. Enable UDI/HIBC Validation
      2. Enable ISO15434 Validation
      3. Enable ISO15434 & ISO15418 Validation
    Select a Settings Category From the Left.