Select All

 
Print All

 
Save All

View Selected


Settings Categories
      1. Disable Beep During Reconnection - Default
      2. Clear connection (pairing) history on Bluetooth reader
      3. Get Bluetooth parameters
      4. Enable Beep Every 30 seconds During Reconnection
      5. Clear connection (pairing) history on Bluetooth charging station
      1. Get BT Charging Base Configuration
      2. Reset BT Charging Base to Factory Defaults
      1. Disable Presentation Scan Mode in Charger - Default
      2. Enable Presentation Scan Mode in Charger with Motion Detection
      3. Enable Cell Phone Reading Enhancement
      4. Disable Cell Phone Reading Enhancement - Default
      5. Set Motion Detect Maximum Brightness to 25%
      6. Set Motion Detect Maximum Brightness to 50%
      7. Set Motion Detect Maximum Brightness to 75%
      8. Set Motion Detect Maximum Brightness to 100% - Default
      9. Enable Target LED During Image Capture - Default
      10. Disable Target LED During Image Capture
      11. Reader Raw Text Commands Off - Default
      12. Reader Raw Text Commands On
      13. Beep On Vibrate On - Default
      14. Beep Off Vibrate On
      15. Beep On Vibrate Off
      16. Beep Off Vibrate Off
      17. Enable Targeting-Always-On
      18. Disable Targeting-Always-On
      19. Beep Volume 0%
      20. Beep Volume 33%
      21. Beep Volume 67%
      22. Beep Volume 100% - Default
      1. Disable Data Formatting - Default
      2. Prefix Comma
      3. Prefix Space
      4. Prefix Tab (USB Keyboard Mode Only)
      5. Erase Prefix Data
      6. Suffix Comma
      7. Suffix Space
      8. Suffix Enter (USB Keyboard Mode Only)
      9. Suffix Tab (USB Keyboard Mode Only)
      10. Erase Suffix Data
      11. Convert Barcode Data to Uppercase
      12. Convert Barcode Data to Lowercase
      13. Convert Barcode Data to Bracketed Hex Output
      14. Erase Prefix & Suffix Data
      15. Prefix AIM ID Off - Default
      16. Prefix AIM ID On
      1. Australian Post On
      2. Australian Post Off - Default
      3. Aztec On - Default
      4. Aztec Off
      5. Aztec Inverse & Normal On
      6. Aztec Inverse Off - Default
      7. Enable BC412 - Disable BC412 Reverse
      8. Disable BC412 Regular and Reverse - Default
      9. Canada Post On
      10. Canada Post Off - Default
      11. Reverse BC412 On
      12. Codabar On - Default
      13. Reverse BC412 Off - Default
      14. Codabar Off
      15. Codabar Checksum On
      16. Codabar Checksum Off - Default
      17. Remove Codabar Start and Stop Delimiters
      18. Keep Codabar Start and Stop Delimiters - Default
      19. Codablock F On
      20. Codablock F Off - Default
      21. Code 11 Checksum Stripped from Result On
      22. Code 11 Checksum Stripped from Result Off - Default
      23. Code 11 On
      24. Code 11 Off - Default
      25. Code 11 One Digit Checksum
      26. Code 11 Disable Checksum Checking - Default
      27. Code 11 Two Digit Checksum - Default
      28. Code 49 On
      29. Code 49 Off - Default
      30. Code 128 Off
      31. Code 128 On - Default
      32. Code 32 (Italian Pharmacode) On
      33. Code 32 (Italian Pharmacode) Off - Default
      34. Code 39 On - Default
      35. Code 39 Off
      36. Code 39 Checksum On
      37. Code 39 Checksum Off - Default
      38. Code 39 Checksum Stripped from Result On
      39. Code 93 On - Default
      40. Code 93 Off
      41. Composite On
      42. Composite Off - Default
      43. Data Matrix On - Default
      44. Data Matrix Off
      45. Data Matrix Mirror On
      46. Data Matrix Mirror Off - Default
      47. Data Matrix Inverse and Normal On - Default
      48. Data Matrix Inverse Off
      49. Data Matrix Rectangular On - Default
      50. Data Matrix Rectangular Off
      51. Data Matrix Rectangular Extended On
      52. Data Matrix Rectangular Extended Off - Default
      53. Grid Matrix On
      54. Grid Matrix Off - Default
      55. GS1 DataBar On - Default
      56. GS1 DataBar Off
      57. Han Xin On
      58. Han Xin Off - Default
      59. Han Xin Mirror On
      60. Han Xin Mirror Off - Default
      61. Han Xin Inverse On
      62. Han Xin Inverse Off - Default
      63. Hong Kong 2 of 5 On
      64. Hong Kong 2 of 5 Off - Default
      65. Interleaved 2 of 5 On - Default
      66. Interleaved 2 of 5 Off
      67. Interleaved 2 of 5 Checksum On
      68. Interleaved 2 of 5 Checksum Off - Default
      69. Interleaved 2 of 5 Checksum Stripped from Result On
      70. Interleaved 2 of 5 Checksum Stripped from Result Off - Default
      71. Japan Post On
      72. Japan Post Off - Default
      73. KIX (Dutch Post) On
      74. KIX (Dutch Post) Off - Default
      75. Korean Post On
      76. Korean Post Off - Default
      77. Matrix 2 of 5 On
      78. Matrix 2 of 5 Off - Default
      79. Maxicode On
      80. Maxicode Off - Default
      81. Micro PDF417 On
      82. Micro PDF417 Off - Default
      83. Micro QR Code On
      84. Micro QR Code Off - Default
      85. Mode 1 QR Code On
      86. Mode 1 QR Code Off - Default
      87. MSI Plessey Checksum Must Be Mod 10
      88. MSI Plessey Checksum Off - Default
      89. MSI Plessey Checksum Stripped from Result On
      90. MSI Plessey Checksum Stripped from Result Off - Default
      91. MSI Plessey Checksum Must Be Mod 11/10
      92. MSI Plessey Checksum Must Be Mod 10/10
      93. MSI Plessey On
      94. MSI Plessey Off - Default
      95. NEC 2 of 5 Checksum On - Default
      96. NEC 2 of 5 Checksum Off
      97. NEC 2 of 5 On
      98. NEC 2 of 5 Off - Default
      99. PDF417 On - Default
      100. PDF417 Off
      101. Pharmacode On
      102. Pharmacode Off - Default
      103. Pharmacode Normal Barcode Decoding (Left to Right) - Default
      104. Pharmacode Reverse Barcode Decoding (Right to Left)
      105. QR Code On - Default
      106. QR Code Off
      107. QR Code Standard Only - Default
      108. QR Code Mirror On
      109. QR Code Mirror Off - Default
      110. QR Code Inverse and Normal On
      111. QR Code Inverse Only
      112. Telepen On
      113. Telepen Off - Default
      114. Output Telepen as Numeric - Default
      115. Output Telepen as ASCII
      116. Trioptic On
      117. Trioptic Off - Default
      118. Reverse Trioptic On
      119. Reverse Trioptic Off - Default
      120. Keep Trioptic Start and Stop Delimiters
      121. Remove Trioptic Start and Stop Delimiters - Default
      122. Straight 2 of 5 Off - Default
      123. Straight 2 of 5 On
      124. UK Plessey On
      125. UK Plessey Off - Default
      126. UK Royal Mail On
      127. UK Royal Mail Off - Default
      128. UPC/EAN On - Default
      129. UPC/EAN Off
      130. UPC Supplemental On
      131. UPC Supplemental Off - Default
      132. UPC E Expansion On
      133. UPC E Expansion Off - Default
      134. Convert UPC-A to EAN-13
      135. Do Not Convert UPC-A to EAN-13 - Default
      136. Transmit UPC-A Check Digit
      137. Do Not Transmit UPC-A Check Digit - Default
      138. Transmit UPC-A Number System
      139. Do Not Transmit UPC-A Number System - Default
      140. Do Not Transmit UPC-E Check Digit - Default
      141. Transmit UPC-E Number System
      142. Do Not Transmit UPC-E Number System - Default
      143. Convert EAN-8 to EAN-13
      144. Do Not Convert EAN-8 to EAN-13 - Default
      145. Transmit UPC-E Check Digit
      146. Convert Bookland EAN-13 to ISBN
      147. Do Not Convert Bookland EAN-13 to ISBN - Default
      148. Convert Bookland EAN-13 to ISSN
      149. Do Not Convert Bookland EAN-13 to ISSN - Default
      150. Transmit EAN-8 Check Digit
      151. Do Not Transmit EAN-8 Check Digit - Default
      152. Transmit EAN-13 Check Digit
      153. Do Not Transmit EAN-13 Check Digit - Default
      154. UPU ID Tags On
      155. UPU ID Tags Off - Default
      156. USPS Intelligent Mail On
      157. USPS Intelligent Mail Off - Default
      158. USPS Planet On
      159. USPS Planet Off - Default
      160. USPS Postnet On
      161. USPS Postnet Off - Default
      162. Enable GS1 DataBar Limited - Default
      163. Disable GS1 DataBar Limited
      164. Enable GS1 DataBar Expanded Stacked - Default
      165. Disable GS1 DataBar Expanded Stacked
      166. Enable GS1 DataBar Expanded - Default
      167. Disable GS1 DataBar Expanded
      168. Enable GS1 DataBar Stacked and GS1 DataBar Stacked Omnidirectional - Default
      169. Disable GS1 DataBar Stacked and GS1 DataBar Stacked Omnidirectional
      170. Grid Matrix Inverse On
      171. Grid Matrix Inverse Off - Default
      172. Grid Matrix Mirror On
      173. BC412 On
      174. BC412 Off - Default
      175. Grid Matrix Mirror Off - Default
      176. Royal Mail Checksum On
      177. Royal Mail Checksum Off
      178. Pharmacode Color On
      179. Pharmacode Color Off - Default
      180. Custom QR Code On
      181. Custom QR Code Off - Default
      182. Han Xin Normal and Inverse On
      183. Aztec Mirror On
      184. Aztec Mirror Off - Default
      185. Code 39 Extended Full ASCII Off - Default
      186. Code 39 Extended Full ASCII On
      187. Enable GoCode & GoCode Mirror Decoding
      1. Set Portuguese for Windows as active language
      2. Set Italian for Windows as active language
      3. Keyboard Support: Simplified Chinese Keyboard Mapping for Windows
      4. List Installed Languages
      5. Get Active Language
      6. Keyboard Support: US English Keyboard Mapping for Windows - Default
      7. Keyboard Support: English Keyboard Mapping for Apple
      8. Keyboard Support: French-Belgian Keyboard Mapping for Windows
      9. Keyboard Support: French Keyboard Mapping for Windows
      10. Keyboard Support: French Keyboard Mapping for Apple
      11. Keyboard Support: German Keyboard Mapping for Apple
      12. Keyboard Support: German Keyboard Mapping for Windows
      13. Keyboard Support: German-Swiss Keyboard Mapping for Windows
      14. Keyboard Support: Italian Keyboard Mapping for Apple
      15. Keyboard Support: Japanese Keyboard Mapping for Windows
      16. Keyboard Support: Russian Keyboard Mapping for Windows
      17. Keyboard Support: Spanish-Latin American Keyboard Mapping for Windows
      18. Keyboard Support: Spanish Keyboard Mapping for Windows
      19. Keyboard Support: Spanish Keyboard Mapping for Apple
      20. Keyboard Support: UK English Keyboard Mapping for Windows
      21. Keyboard Support: US International (Universal) Keyboard Mapping for Windows
      22. Data Encoding: Raw ASCII to Keyboard XML File Lookup - Default
      23. Data Encoding: UTF8 to Unicode Codepoint - Alt Sequences for Windows
      24. Control Character Input - Language Default - Default - Default
      25. Control Character Input - Ctrl + Character
      26. Control Character Input - Alt + Keypad
      27. Control Character Input -Alt + Leading Zero
      1. Alternate Operating System (Linux/Mac) On
      2. Alternate Operating System (Linux/Mac) Off - Default
      1. Set reader into USB Full Speed mode
      2. Set reader into USB High Speed mode - Default
      3. USB HID Vendor Mode
      4. USB Keyboard Mode - Default
      5. USB Virtual COM Multiple Ports
      6. USB Virtual COM Common Ports
      1. Enable Packet Mode
      2. Enable Raw Mode - Default
      1. Disable Duplicate Scan Delay - Default
      2. 1 Second Duplicate Scan Delay
      3. 2 Second Duplicate Scan Delay
      4. 3 Second Duplicate Scan Delay
      5. 5 Second Duplicate Scan Delay
      6. 10 Second Duplicate Scan Delay
      7. 30 Second Duplicate Scan Delay
      8. 1 Hour Duplicate Scan Delay
      9. 1 Day Duplicate Scan Delay
      1. Enable Upload Image Mode
      2. Disable Upload Image Mode - Default
      1. Output Reader Configuration
      2. Get Reader Parameters
      3. Reader Information, limited, 1500
      1. Reset Bluetooth Reader to Factory Defaults
      2. Save All Reader Settings
      3. Reboot Reader
      1. Enable UDI/HIBC Validation
      2. Enable ISO15434 Validation
      3. Enable ISO15434 & ISO15418 Validation
    Select a Settings Category From the Left.